S-Pankki: "SSO: Tunnistusagentti epäonnistui"

Applies to

SSO Server 6.8
TUPAS 2.3c, S-Pankki

Symptoms

Use case: testing authentication first time in production environment
TUPAS authentication with S-Pankki failed
SSO Server error: "tunnistusagentti epäonnistui" displayed in browser


Figure 1. SSO Web agent failed with S-Pankki TUPAS method "Tunnistusagentti epäonnistui"

Causes and resolutions

Service provider (MAC key) was delivered from S-Pankki as hexadecimal. This needed to be converted to string in Ubisecure SSO Server Management, mackey1 field (please see Figure 2 on page Installing the TUPAS Authentication Method).

Nordea: "Palvelusopimusta ei löydy (V2322A1M)" and "Paluulinkki on virheellinen. (V2363A13)"

Applies to

SSO Server 6.8
TUPAS 2.3c, Nordea

Symptoms

Use case: testing authentication first time in production environment
TUPAS authentication with Nordea failed
Nordea: "Palvelusopimusta ei löydy" displayed in browser
Nordea: " Paluulinkki on virheellinen. (V2363A13)" displayed in browser


Figure 2. SSO Web agent failed with Nordea TUPAS method "Palvelusopimusta ei löydy"

Causes and resolutions

Service provider (A01Y_RCVID / Customer code) was delivered from Nordea with additional hyphen. Please remove it in Ubisecure SSO Server Management, rcvid field (please see Figure 2 on page Installing the TUPAS authentication method).
Return address (A01Y_RETLINK) should be defined in Nordea TUPAS service as
https://[UBISECURE SSO SERVER ADDRESS]/uas/return/nordea.1/
where nordea.1 is authentication method name in Ubisecure SSO Server.
Nordea service contract needs to point to [UBISECURE SSO SERVER ADDRESS], otherwise retlink cant be used.

Handelsbanken: Virheellinen sanoma. Virhe 03.

Applies to

SSO Server 6.8
TUPAS 2.3c, Handelsbanken
Use case: testing authentication first time in production environment

Symptoms

Use case: testing authentication first time in production environment
TUPAS authentication with Handelsbanken failed
Handelsbanken: " Virheellinen sanoma. Virhe 03" displayed in browser

Cause and resolution
One possible cause and resolution might be, that service provider (A01Y_RCVID / Customer code) delivered from Handelsbanken lacked three zeros (000) from the end. If that was the cause, please add three zeroes to Handelsbanken TUPAS authentication method in Ubisecure SSO Server Management, rcvid field (please see Figure 2 on page Installing the TUPAS authentication method).
If you continue to have problems, please contact Handesbanken support.

Browser not supported