Please see the current Release Notes (here - scroll down to change log) for the active release change log

Ubisecure SSO 8.x.x

SSO 8.10.1 (21/06/2022)

New Features

IDS-2671 - SSO now support Sign in with Apple. A few new parameters have been introduced to enable this integration. Check out our Configure Sign in with Apple knowledge base article
IDS-2117 - SSO acting as broker now supports ftn_spname for OpenID Connect methods. This parameter is enabled with FinnishTrustNetwork parameter for the method and uses the client_name specified for the application as the ftn_spname value. Read more about the configuration from OpenID Connect authentication method - SSO configurations
IDS-3491 - SSO OAuth 2.0 applications can be configured to overwrite the spname value configured in the system, to use the value coming from another trusted broker in the Finnish Trust Network. This is configured through the AllowFtnSpname configuration string. More details on this configuration string can be found from OAuth 2.0 integration guide - SSO
IDS-2979 - SSO acting as broker now support spname for SAML methods. Similar to OpenID Connect, this parameter is enabled with FinnishTrustNetwork parameter for the method and uses the client_name specified for the application as the spname value. Configuration information can be found from SAML IDP Proxy - SSO
IDS-3518 - SSO SAML applications can be configured to overwrite the spname value configured in the system, to use the value coming from another trusted broker in the Finnish Trust Network. This is configured through the AllowFtnSpname configuration string. More details on this configuration string can be found from SAML2 configuration - SSO
IDS-3006 - SSO acting as broker now support spname for Mobile PKI methods. This parameter is enabled with FinnishTrustNetwork parameter for the method and uses the client_name specified for the application as the spname value. The value is shown in the DisplayName field of schema as shown in the Installing and configuring ETSI MSS Mobile PKI - SSO

Improvements

IDS-3149 - A new client configuration has been added to SSO to mitigate Downgrade attacks. "require_signed_request_object" can be set to true in client metadata to require authorisation requests to be signed. See Client configuration reference - SSO for details
IDS-2827 - Public clients can now be configured to use PKCE without client_secret. When including "token_endpoint_auth_method": "none" in the client metadata - PKCE (code_challenge is required in the authorisation requests). Configuration information can be found from Authorization code grant and web single sign-on - SSO
IDS-3617 - Improvements to the TicketProtocolOAuth2Exception and TicketProtocolException loggings for OAuth2 and SAML2 applications to include client Id (where available) to easier debug where issues with application configurations. Example of new log entries extended with client Id
SAML2 application
```
2022-03-18 10:22:50,380 protocol [192.168.0.108] SingleSignOnServlet: protocol.TicketProtocolException: [saml-application] Ticket validation error: ...
```
OAuth2 application
```
2022-03-28 12:50:57,409 protocol ERROR [172.30.0.1] AuthorizationServlet: protocol.oauth2.TicketProtocolOAuth2Exception: [oauth2-application] Invalid ticket request: ...
```

Corrections

IDS-2059 - A correction to state value where previously if state included '%2B' it converted it to '+' in authorisation response. This is now resolved and returns the expected '%2B' in the response
IDS-3601 - A security vulnerability in password-reset application that allowed updating password of a user without verifying OTP code has been corrected
IDS-3660 - A custom redirect URI scheme previously caused failure in redirect with OAuth2 applications, this was now been resolved

SSO 8.9.3 (11/02/2022)

Improvements

IDS-3485 - To prevent Cross-JWT Confusion we have removed the client ID in the sub claim when Passing a Request Object by Value. If, for some reason this would still be required we have introduced the client metadata parameter "ubisecure_request_object_sub_claim_required" to allow backwards compatibility, see configuration parameters in OpenID Connect authentication method - SSO. This, however is not recommended.

SSO 8.9.2 (05/01/2022)

Corrections

IDS-3397 - Log4j2 updated to version 2.17.1 to remove known vulnerabilities

SSO 8.9.1 was omitted due to new patch version of Log4j2 being released

SSO 8.9.0 (16/12/2021)

New Features

IDS-399 - SSO key rotation possibilities has been enabled for SSO server
IDS-2956 - SSO API calls related to create, update and delete signing and encryption keys for SSO server has been included. Examples can be found from Key rotation - SSO
IDS-2957 - SSO API calls related to associate or remove association of signing and encryption keys with SSO server has been included. How to perform key rotation in SSO can be found from here
IDS-2961 - SSO API call to get certificate signing request for a specific key. This CSR is forwarded to a CA for signing and later on associated back to the specific key
IDS-2962 - SSO API call to store the signed certificate with a specific key. Only one certificate is allowed for a key, if there are multiple available in the body, the first will be read and the others will be ignored
IDS-2964 - New and/or updated signing and encryption keys are published in OpenID Provider JWKS when changes are detected. All non-expired signing keys and one valid encryption key is shown in the metadata.jwks. The scheduler is run every minute to check for changes
IDS-2963 - New and/or updated signing and encryption keys are published in SAML2 IdP Metadata when changes are detected. All non-expired signing keys and one valid encryption key is shown in the Metadata. The scheduler is run every minute to check for changes. Each valid key is provided twice in the SAML2 IdP Metadata, once inside IDPSSODescriptor element and once inside SPSSODescriptor element
IDS-2970 - New and/or updated signing and encryption keys are published in WS-Federation IdP Metadata when changes are detected. All non-expired signing keys and one valid encryption key is shown in the FederationMetadata. The scheduler is run every minute to check for changes
IDS-3241 & IDS-3242 - Client registration request provides jwks_uri instead of static jwks to better support key rotation

Improvements

IDS-1486 - A documentation pages for diag log description has been created to match the audit log description pages, for easier use by developers.
IDS-2757 - id_tokens are included in refresh_token grant responses when "openid" is included in the scope. Extending the requested scopes with additional claims after the refresh token has been created will not fetch additional information. More information can be found from Authorization code grant and web single sign-on - SSO
IDS-3303 - Password application IDP metadata is automatically updated from the IDP metadata endpoint once a minute to support key rotation. More details are available from Password application installation - SSO

Corrections

IDS-3125 - A Cross-site scripting (XSS) vulnerability has been resolved in SSO error page
IDS-1039 - SSO UI now shows "User account is locked" for OTP List and TOTP method after a user has tried to login with invalid code 5 times (or the amount configured in login attempts). Previously the user was shown the message after they tried to login on the 6th time after the method had already been locked
IDS-1652 - Message shown to user that have a mismatch of password and confirmation during password change now states a clearer reason for error "Make sure the passwords match. Please try again". Previously the message stated "The new credentials were not accepted" which did not point towards the reason for not being accepted
IDS-3176 - SSO UI now shows "User account is locked" for Unregistered SMTP OTP and Unregistered SMS OTP method after a user has tried to login with invalid code 5 times (or the amount configured in login attempts). Previously the user was shown the message after they tried to login on the 6th time after the method had already been locked
IDS-2828 - ubikt.jar now generates Certificate Signing Request (CSR) file from certificate contained in unix/win32.config. An example how to use the tool can be found from Increase the SSO metadata certificate private key size
IDS-3109 - SSO UI and audit logs now show correct "The user account is locked" message for TOTP method when a user has input invalid OTP code too many times and their account has gotten locked. Previously the message showed "The authentication method configuration is invalid: UNSPECIFIED"
IDS-3014 - SSO now shows correct template when returning from an external authentication method (SAML). Previously when a user returned back to the application, the default application template was shown to the user

SSO 8.8.1 (21/06/2021)

Corrections

IDS-3125 - Cross-site scripting (XSS) vulnerability has been corrected in error template

SSO 8.8.0 (09/06/2021)

New Features

IDS-105 - Administrators are now able to configure OpenID Connect methods in SSO Management UI without using the Management API. Read our Knowledge base article Configure OpenID Connect authentication method in SSO Management UI
IDS-2861 - UserInfo endpoint now supports POST requests. See Authorization code grant and web single sign-on - SSO for more information
IDS-2765 - SPI OpenID Connect CIBA method has been included to SSO. This allows CIBA method to be used as step-up method for your registered users. Read more about the configuration from OpenID Connect CIBA authentication method
IDS-2937 - New API calls have been added to the Accounting Service to get more information on the ticket granted events happening in your system. The API calls return method and application used for each of the events and are able to be queried daily, hourly or per minute. More information about the API calls can be found from Event details API section in Accounting Service API
IDS-2256 - Freja eID is now supported by SSO. Read our Knowledge base article Configure OpenID Connect Freja eID login
IDS-3008 - TOTP API has been extended with a new call to get information if a user has the TOTP method enabled or disabled for their account. Detailed information how to use the API is available in TOTP API swagger documentation that can be configured with the TOTP API - SSO

Improvements

IDS-2862 - In Authentication requests that require End-user interaction to continue although prompt parameter is none the error response has been changed from previous access_denied to interaction_required, according to the OpenID Connect Core 1.0 specifications
IDS-2847 - Hardcoded acr_value for Client Initiated Backchannel Authentications method has been removed
IDS-2833 - CIBA adapter (previously UBAA) OpenID Provider metadata has been updated with backchannel_token_delivery_modes_supported and token_endpoint_auth_signing_alg_values_supported values. More information about the metadata can be found from Installing and configuring Swedish BankID - SSO
IDS-2837 - invalid_grant error message has been updated to use LOGIN_CANCEL error message instead of previous AUTHENTICATION_METHOD_INVALID for CIBA methods
IDS-2940 - CIBA adapter's Spring Boot version has been updated and Swagger UI URL has changed, check the new URL from Installing and configuring Swedish BankID - SSO
IDS-1670 - Step-up method usability has been improved to not show any selection between step-up methods if there is only one configured for the application. For example, if only TOTP method is available as 2FA method in application, the user no longer needs to click "totp.1" button after signing in with password, but is immediately asked for TOTP code
IDS-2160 - Improved performance when generating and downloading reports from the Accounting Service. In our testing we have noted substantially decreased download times observable in larger datasets
IDS-2794 - Updated unix.config/win32.config file to include sso-api.uuid, totp.uuid and accounting.client.uuid to preserve the client IDs during upgrade of your system. Info about this can be found from Preserve essential configuration settings in upgrade
IDS-3019 - Accounting Service methods have been updated for CIBA methods. Previously named UBAA method is now referred to as UNREGISTERED.CIBA and registered CIBA method is referred to as DIR.CIBA. See Accounting Service - SSO for more information
IDS-3011 - Unregistered CIBA method: Transformation of id_token claims was changed to be same as in OpenID Connect method. Also added a new configuration option `usernameClaim` for defining the id_token claim used as the subject for the unregistered user
IDS-3015 - Token endpoint responses have been updated to have HTTP headers "Cache-Control: no-store" and "Pragma: no-cache" set by default to prevent information to be cached
IDS-3018 - Refresh token endpoint error responses have been updated in accordance to
OpenID Connect Core 1.0
IDS-3061 - New compatibility flag was introduced to resolve backwards incompatibility with OTP printout and TOTP secrets in the case that the users are stored in SQL database. If this is the case LegacyUserCredentialsTable needs to be added to the method for the users to keep using their set secrets. New SQL users or existing users recreating their secrets will be handled correctly. See more details from TOTP Authentication Method and OTP Printout authentication method - SSO
IDS-3062 - CIBA adapter has been updated to include client_id in aud claim and id_token expiration time. Configuration information can be found from Installing and configuring Swedish BankID
IDS-3009 - TOTP method can now be used without additional schema changes when using AD LDS as Ubilogin Directory together with external SQL directory

Corrections

IDS-1511 - SSO Password reset: old tokens not invalidated. There are built-in features that can be used to mitigate
- OTP should be set to expire (policy.oauth.otp.timeout)
- Password min-age should be set greater than OTP expiration time (policy.password.min-age)
IDS-2721 - MENU_INTRO2_TEXT in SSO messages properties has been fixed to show the client name in SSO login screen when configured in client_name is configured in the metadata. Review Login screens - SSO for more details
IDS-2247 - OTP_LOGIN_REMAINING_PASSWORD_AMOUNT in SSO properties has been fixed to show the remaining one-time passwords left on the printed list to warn the user to renew the list before it runs out of passwords. More details on configurations can be found from Login screens - SSO and OTP Printout authentication method - SSO
IDS-2750 - Refresh tokens were invalid for Unregistered SMS with an Ubilogin Directory user. This issue has been fully resolved.
IDS-3104 - SPI TOTP method: Account lockout policy section is now shown in TOTP method configuration in SSO Management UI and pressing "Update" without any changes doesn't remove the lockout policy configurations.

SSO 8.7.1 (21/06/2021)

Corrections

IDS-3125 - Cross-site scripting (XSS) vulnerability has been corrected in error template

SSO 8.7.0 (20/01/2021)

New Features

IDS-1256 - SSO now supports Authorisation Code Flow with Proof Key for Code Exchange (PKCE) and will start validating the code_challenge and code_verifier for clients that are already sending them now. PKCE is currently only supported when SSO acts as Authorisation server (IDP). More information can be found from Authorization code grant - SSO and Provider metadata reference - SSO

Improvements

IDS-2784 - Accounting Service dependencies has been updated to remove vulnerabilities. You can find the latest versions used in the Accounting Table 2 on 3rd party licenses - SSO
- Note: Related to Spring Boot updates, server.use-forward-headers property has been deprecated in favour of server.forward-headers-strategy and logging.name has changed to logging.file.name. Please review Accounting Service additional configuration - SSO for more details
IDS-2706 - SSO dependencies have been updated to remove vulnerabilities. You can find the latest versions used in the SSO Table 1 on 3rd party licenses - SSO
IDS-2498 - Issue with policy.password.history parameter has been fixed and new passwords are compared against the amount of previous passwords in the system. If value is set to 5, the user can not change to the any of the 5 previous passwords used. This policy still has issues with CustomerID and causes issues in user creation if enabled for password method used in CustomerID, see IDS-2851 in known issues
IDS-2985 - Refresh token logging have been extended with details of which refresh token was trying to be accessed to help with troubleshooting. This can be enabled by setting debug level on diag.protocol logs.

SSO 8.6.1 (21/06/2021)

Corrections

IDS-3125 - Cross-site scripting (XSS) vulnerability has been corrected in error template

SSO 8.6.0 (05/11/2020)

New Features

IDS-1885 - SSO now supports Time-based One-time Password as a new step-up method. See TOTP Authentication Method for more details
IDS-2631 - TOTP API application has been created for handling of user TOTP secrets. These API calls allow Administrators to set and remove the secrets for users through their own self-service UI/application (this is not provided within the Ubisecure Identity Server). See TOTP API - SSO for more info how to setup and configure

Improvements

IDS-2714 - Support for PBKDF2-SHA256 password encoding has been added to SSO. All supported values can be found from Management UI authentication methods
IDS-2571 - Improvement for handling multiple IPs in "proxy.remote-addr-name = x-forwarded-for" configuration. If there are multiple IPs included in the request, all of the IPs will be shown in the audit logs, separated by ",". This will need to be taken into consideration when parsing the audit logs. Previously multiple IPs caused issues with Ubilogin Management, Logviewer and Search applications.
IDS-2717 - Changes to application configuration for two-factor authentication methods. If both password and a step-up method is enabled for an application, users who do not have the specific step-up method enabled on their account can log in to the application with password only. See Authentication and authorization process - SSO

SSO 8.5.2 (21/06/2021)

Corrections

IDS-3125 - Cross-site scripting (XSS) vulnerability has been corrected in error template

SSO 8.5.1 (07/10/2020)

Improvements

IDS-2719 - ubixmlsec library has been updated to version 1.5.8.50494 to support http://www.w3.org/2009/xmlenc11#aes128-gcm encryption algorithm that will be taken into use by Suomi.fi service in the near future

SSO 8.5.0 (17/06/2020)

New Features

IDS-1303 - Mobile Connect integration has been extended with support related to logging and consent. This enables Mobile Operators to take Mobile Connect Authentication and Authentication Plus product into commercial use. The items that have been updated for this feature can be found in the improvements section.

Improvements

IDS-2516 - OAuth 2.0 applications can be extended with compatibility flag ExtendedOAuth2AuditLogging. This enables additional log entries to the audit log to facilitate Mobile Connect billing use cases. This can also be use for other OpenID Connect use cases. More detailed information can be found from Additional audit logging for OAuth 2.0
IDS-1304 - Authorisation policies have been updated with scope field. This will allow Administrators to specify which scopes should be evaluated for OpenID Connect and OAuth 2.0 applications. You can read more about how to Manage authorization policies - SSO here
IDS-2522 - Improved consent page includes requested scopes and confirm/cancel buttons instead of previous static text and checkbox. This improvement can be used for OpenID Connect methods and OAuth 2.0 applications. For other applications and methods, an updated static page of consent information will be shown to the end user. Read more about how to configure the consent screen from our Login screens - SSO and Internationalization - SSO documentation pages.
IDS-1591 - Mobile ID (Mobiilivarmenne) phone number input field has been changed from 'text' to 'tel' to improve the user experience on mobile devices. Users default screen will show number keypad rather than alphabet keyboard, easing use of the service
IDS-2486 - Optimisation of LDAP search in Password Reset application related to lookup of available methods
IDS-2014 - Additional information for the different entry types has been added to our Audit log description - SSO
IDS-2034 - Improved documentation how to setup authentication methods using SSO Management API can be found from OpenID Connect authentication method - SSO
IDS-750 - Improved documentation related to handling of error situation not to expose any sensitive server or software information. Read more about how to use reverse proxy in our Security considerations for production environments - SSO
IDS-1487 - Improved version handling of SSO components in order to have a better understanding of which version is currently installed. Logging of correct version (i.e. same as the release version) during SSO startup
IDS-2445 - Improvement to how threads are handled for Health check API. In clustered environments it was noticed that the health check calls could go into a deadlock due to timing issue when connection was shutting down
IDS-2615 - OAuth2 / OpenID Connect Token responses have been changed to exclude the id_token for refresh requests. This is to make sure that no additional information is shared with the application that the user has not approved to be shared. Read more about Access Token and ID Token from Authorization code grant and web single sign-on - SSO
IDS-2608 - Updated audit log field "Web Application User ID" to get username sent to the application in the log entries that have this field available. More information can be found from Audit log description - SSO

Corrections

IDS-2158 - Version number in the footer of SSO Management UI now correctly displays the installed version of the application
IDS-2317 - UsernameUserMappingIdentityFactory flag has been set to disabled as default as specified in SSO 8.4.1 release notes. If this functionality needs to be enabled follow the Enabling UsernameUserMappingIdentityFactory instructions
IDS-2032 - Changing log levels in SSO management UI will now come into affect without restarting SSO application, this would previously require a restart
IDS-1182 & IDS-1469 - Documentation has been updated related to how to configure your reverse proxy in order not to expose any sensitive server or software information. Read more about how to use reverse proxy in our Security considerations for production environments - SSO page
IDS-2537 - Correction to jQuery call that broke WS-Federation logout in 8.4.0 and 8.4.1. If using WS-Federation methods, we suggest to upgrade to SSO 8.5.0 to resolve this issue

SSO 8.4.1 (06/02/2020)

Improvements

IDS-2161 - Merged changes made in SSO 8.3.8 that did not make it into SSO 8.4.0 release (see Change log - SSO)
IDS-2058 - Addition of compatibility flag for UsernameUserMapping legacy feature in order to prevent exhaustion of LDAP connections. This will be disabled by default in upcoming SSO 8.5.0 release (Disabling UsernameUserMappingIdentityFactory)
IDS-2166 - Inclusion of KeyID in metadata generated by SSO Management API (OpenID Connect authentication method - SSO)
IDS-2283 - Client metadata extension ubisecure_request_parameters / acr_values has been updated to have highest priority in outbound requests in order to ensure that correct values are sent (OpenID Connect authentication method - SSO)
IDS-1999 - Ability to configure RequestedAuthnContext through AuthnContextClassRef or AuthnContextDeclRef together with comparision for SAML authentication methods (SAML IDP Proxy - SSO)
IDS-2303 - Ability to configure the thread pool size of Mobile PKI authentication method (Installing and configuring ETSI MSS Mobile PKI - SSO)

Corrections

IDS-2208 - Fix for StrictAudiencePolicy to be able to set the compatibility flag system-wide, this did not overwrite application or authentication method flags set in SSO 8.3.8 (OpenID Connect authentication method - SSO)

SSO 8.4.0 (12/11/2019)

New Features

IDS-1103 - Accounting Service
- More information about this feature can be found from our Developer portal (Accounting Service - SSO)
IDS-994 - Per user authentication matching
- More information about this JavaScript based frontend user interface extension can be found from our public Github repository (https://github.com/ubisecure/per-user-authentication-matching)

Improvements

IDS-58 - Server side session storage/Redis product documentation (Use Redis with Identity Server)
IDS-79 - NameIDPolicy must be set for AuthnRequest sent by SSO
IDS-110 - Updated SSO external library (3rd party) dependencies (3rd party licenses - SSO)
IDS-684 - AuthnContextClassRef from a SAML Identity Provider to SSO (IdP Proxy) should also be possible to be forwarded to SP
IDS-930 - SSO management API for persistentID (PCR) name mapping
IDS-1080 - Identity Server supports BCrypt for password encoding

Corrections

IDS-653 - Name change: Agent has been replaced with Application in SSO UI
IDS-683 - Fix for deadlock in JLDAP
IDS-712 - Fix usability on Unregistered SMS login screens. Focus set to OTP field
IDS-1106 - Fix for SSO server jwks interoperability issue in Chrome
IDS-1190 - Fix for one time feature not working for OAuth applications when there is SSO session available
IDS-1412 - Fix for REDIS failover when the node configured in SSO goes offline

Ubisecure SSO 8.3.8 (24/10/2019)

This release improves the compatibility with Finnish Trust Network. It also includes improvements on general OpenID Connect compatibility.

Improvements

IDS-2037: OpenID Connect: Ability to duplicate parameters outside the request object when sending Authorization requests as JWTs
IDS-2107: OpenID Connect: Implementation of Key ID in JWKs, JWS and JWE
IDS-2108: OpenID Connect: Send client_id as a request parameter in Token requests when using client assertions
IDS-2110: OpenID Connect: Ability to perform relaxed or strict JWT aud claim validation
IDS-2113: OpenID Connect: Improved UI locale handling
IDS-2114: OpenID Connect: Ability to perform Authentication request with HTTP POST instead of GET
IDS-2115: OpenID Connect:: Include the aud claim in client assertions
IDS-2164: OpenID Connect: Ability to define static ubisecure_request_parameters to be sent with Authorization requests

Ubisecure SSO 8.3.7

This version was omitted from public consumption due to limited use functionality

Ubisecure SSO 8.3.6 (12/04/2019)

Improvements

IDS-1412: Improvements in support for Redis Cluster failover during server startup and runtime.
- SSO now supports configuring more than one initial seed nodes which are used during SSO startup. Instructions on setting the initial seed nodes can be found here.
- SSO now recovers from changes in the Redis cluster's topology during runtime, such as nodes going down and back up.

IDS-1460: The errors "User not found" and "Invalid credentials" are no longer revealed in "subStatus" attribute of the JSON object "view", which can be found when viewing the page source of the login page.

Ubisecure SSO 8.3.5 (01/03/2019)

Corrections

IDS-1354: Fixed warning of missing library file commons-daemon.jar in application server log during startup
- This issue occurred in version 8.3.4 but does not cause regression other than the warning note in the logs

Ubisecure SSO 8.3.4 (21/02/2019)

New Features

IDS-1308: Finnish Trust Network: Support for SAML2 LG extension as specified in FTN SAML2 Profile v1.0 chapter 3.5.3.1.
- SSO is now able to read the LG extension from inbound SAML 2.0 Authentication Requests and use it as the login UI locale; and write it to outbound SAML 2.0 Authentication Requests.
- For SAML 2.0 Authentication Methods, writing the extension in an Authentication Request requires a new Compatibility Flag FinnishTrustNetwork set for the method.
- For SAML 2.0 Applications, the Extension is read from an Authentication Request automatically if one is available.

Corrections

IDS-1326: Running the setup.sh for Enterprise Linux doesn't require high system entropy.
- This was an errored requirement used only in 8.3.2 and 8.3.3
IDS-1279: Mobile Connect Authentication v1.1: Error responses for Mobile Connect authentication requests are now compatible with the updated Authentication 1.1 profile.

Ubisecure SSO 8.3.3 (17/01/2019)

New Features

IDS-1146: One-time password format in OAuth SMS/SMTP grant can be freely formatted.
- Check the documentation from Configuration of unregistered SMTP - SSO and Installing SMS authentication method - SSO.

Ubisecure SSO 8.3.2 (14/01/2019)

New Features

IDS-1117: Support for HTML emails in OAuth SMTP-OTP Grant.
- You can set a new parameter in OAuth and our language files to set an explicit content type for emails and if omitted then plain text will be used for backward compatibility.
- Check the documentation from Configuration of unregistered SMTP - SSO and Password Reset application internationalization - SSO.

Corrections

IDS-947: Corrected ForceAuthn authentications when user has already an existing authentication.
IDS-1037: Made it possible to update Tomcat version.
- Check the RefreshServlet security chapter from Security considerations for production environments - SSO and Configuring CORS with credentials - SSO.
IDS-1106: Corrected JWK interoperability issue with Chrome browser.

Ubisecure SSO 8.3.0 (12/10/2018)

New Features

IDS-270: Password Reset - A new web application for resetting a forgotten password.
- More information in the documentation.
IDS-639: Support for Swedish BankID via external Authentication Adapter using Ubisecure Backchannel Authentication Adapter (UBAA) Authentication Method.
- Technical information, installing and configuring Swedish BankID Authentication Adapter is described here
- Installing the Ubisecure Backchannel Authentication Adapter Authentication Method is described here
  - SSO Management UI supports configuration by providing new method type Backchannel Authentication Adapter

Impovements

IDS-963: The LDAP search for finding a ubiloginAuthMapping entry in the Ubilogin Directory, that is performed each time a user is authenticated, consumes less resources
IDS-78: LDAPS support for SSO install.sh, export.sh and import.sh
IDS-388: The default font size for error messages is increased from 0.8em to 1.1em

Corrections

IDS-60: Disabled users cannot log in to applications with accounts that are linked by User Driven Federation.
- When a user authenticates with a federated identity and a matching local account is returned by a FederationManager implementation (i.e. CIDFederationManager or UbiloginFederationTable), the local account status is now verified and the access is denied if the status is not valid.
- The workaround fix Preventing disabled users from logging in with user driven federation as described in the page User driven federation is not needed anymore.
IDS-1014: SSO management doesn't disclose the client_secret for OAuth2 application agents
- When uploading a client metadata to an OAuth 2.0 application agent using the SSO Management Console, if the metadata contains a client_secret, the client_secret is now removed before storing the metadata in the agent configuration in Ubilogin Directory.
  - Prior to 8.3, the client_secret was not removed, but stored as is in the agent configuration in Ubilogin Directory.
- Furthermore, even if the client_secret has already been stored in the agent configuration, as may be the case for agents that have already been activated prior to SSO 8.3, the client_secret will now not be shown in the SSO Management Console nor in the SSO Management API.
  - Prior to 8.3, the client_secret, if set in the client metadata, was shown in SSO Management Console.
IDS-1052: OTP lists for UbiloginDirectory users created from SSO Management Console are not invalid randomly
IDS-945: Execute flag is set for the bash scripts in the Linux version
IDS-723: The SMTP message that is sent by SMTP OTP method sets the Date header as specified in RFC 822
IDS-821: Some errors (such as LDAP read timeout) during password/reset don't deactivate the servlet that catches it
IDS-437: Main Class in the MANIFEST.MF of sso-pkipolicy.jar is correct
IDS-1074: Linux version: OpenLDAP installation script (ldap/openldap/install.sh) doesn't show an unnecessary error message ldap_modify: No such attribute (16)

Ubisecure SSO 8.2.25-1 (06/2018)

Corrections

IDS-782: Added missing OTP Server files to installation package.

Ubisecure SSO 8.2.25

Improvements for Finnish MobileID (Mobile Certificate / Mobiilivarmenne) Authentication Method

IDS-578: Configurable status request delay.
- The delays between the transaction request and the initial status request, as well as the delay between consecutive status requests after the first one, are configurable. The configuration parameters are initialStatusRequestDelay and consecutiveStatusRequestDelay. Refer also to the method configuration guide.
IDS-658: Separate error message when authentication times out.
- There is a new error message LOGIN_EXPIRED that is shown whenever authentication timeout occurs. The timeout is set in the ae.timeout configuration parameter. The possible error messages are listed under ETSI MSS Mobile PKI Unregistered Screen in Login Screens.

Corrections

IDS-589: Chrome: Forms submitted using POST to SSO's browser endpoints don't work.
- SSO 8.2.19 and 8.2.24 had the issue with Chrome browser, that Forms submitted using POST method to SSO's browser endpoint return 403 Forbidden HTTP status. This caused problems for example with SAML 2.0 login sequence with Ubisecure SAML SP module, because it uses SAML HTTP-POST binding by default, which is based on send a form using POST. That issue is now fixed.

Ubisecure SSO 8.2.24

Improvements and Corrections for Finnish Mobile ID (Mobile Certificate / Mobiilivarmenne) Authentication Method

IDS-89: Configurable length of Event Identifier
- Length of the event identifier used for matching the authentication event in the mobile device and the browser can now be configured to be 4 to 8 digits long. This is done by setting the new configuration parameter eventIdLength, which is also described in the method configuration documentation.
IDS-555: Show the error message for missing or invalid NoSpamCode
- When NoSpamCode has been asked from a user, but the NoSpamCode the user has given is invalid or missing, error message is now shown to the user to indicate what went wrong.
IDS-556: NoSpamCode field being visible or not is preserved when error message is shown
- NoSpamCode field is hidden in login screen with error message, if the field was also hidden before the error. Conversely, the field is shown, if it was also shown before the error.
IDS-582: Correct text in the label for the phone number is shown in the wait screen
- The wait screen (the screen where the Event Identifier is shown) shows now correct text MPKI_UNREGISTERED_MOBILENUMBER in the label for the phone number.

Other Changes

IDS-464: Mobile Connect / OpenID Connect: SSO decrypts an encrypted Mobile Connect login_hint when passed to OpenID Connect Authentication Provider
- SSO passes login_hint to an Open ID Connect Authentication Provider as a generic unencrypted OpenID Connect login_hint also, if the login_hint originates from a Mobile Connect Authentication Request that contains an encrypted login_hint.

Ubisecure SSO 8.2.19

Improvements and Corrections

IAM-2304: OpenID Connect authentication method
- OpenID Connect authentication providers can now be used as authentication methods in SSO. For more information, please see the documentation in OpenID Connect authentication method - SSO.
IAM-1038: OpenID Connect: Support for configuration of essential JSON Web Algorithms in encryption and signing
- Along with the previously supported RS256 digital signing algorithm, we have added support for HS256, in which the signing key is derived from client_secret value. For encryption, there are also options for algorithms in key management and content encryption.
  Complete list of supported algorithms for the various endpoints can be found in the OpenID Connect provider metadata (see documentation for OAuth 2.0 and OpenID Connect metadata - SSO).
  Reference: https://tools.ietf.org/html/rfc7518
IAM-2156: OpenID Connect: Configurable idtoken encryption and signing
- Added support for enabling encryption for idtokens, which can be configured by setting id_token_encrypted_response_alg and id_token_encrypted_response_enc configuration parameters in the client metadata. The digital signing algorithm used for idtokens can respectively be configured by setting id_token_signed_response_alg (by default it is "RS256").
  Complete list of supported values is provided in the id_token_encryption_alg_values_supported, id_token_encryption_enc_values_supported and id_token_signing_alg_values_supported attributes in the OpenID Connect provider metadata (see documentation for OAuth 2.0 and OpenID Connect metadata - SSO).
IAM-2157: OpenID Connect: Configurable userinfo response encryption and signing
- Added support for enabling encryption for userinfo endpoint responses, which can be configured by setting userinfo_encrypted_response_alg and userinfo_encrypted_response_enc configuration parameters in the client metadata. The digital signing algorithm used for userinfo response can respectively be configured by setting userinfo_signed_response_alg (by default no signature is added to userinfo response).
  Complete list of supported values is provided in the userinfo_encryption_alg_values_supported, userinfo_encryption_enc_values_supported and userinfo_signing_alg_values_supported attributes in the OpenID Connect provider metadata (see documentation for OAuth 2.0 and OpenID Connect metadata - SSO).
IAM-2303: OpenID Connect client integrations: JSON Web Token (JWT) Profile for Client Authentication
- Added support for JWT based methods client_secret_jwt and private_key_jwt for client authencation. The method to be used by the client integration can be configured by setting token_endpoint_auth_method and token_endpoint_auth_signing_alg configuration parameters in the client metadata.
  Complete list of supported values is provided in the token_endpoint_auth_methods_supported attribute in the OpenID Connect provider metadata (see documentation for OAuth 2.0 and OpenID Connect metadata - SSO).
  References:
      https://tools.ietf.org/html/rfc7521#section-4.2
      https://tools.ietf.org/html/rfc7523#section-2.2
      http://openid.net/specs/openid-connect-core-1_0.html#ClientAuthentication
      https://tools.ietf.org/html/rfc7519
IAM-2364: OpenID Connect client integrations: Any port is allowed for Loopback URI Redirection
- When a loopback URI (such as "http://localhost/app") is set in the redirect_uri or redirect_uris attribute of the client metadata of an OAuth2 application, then it is allowed use any port in the redirect_uri of the Authorization Request.
  Reference: https://tools.ietf.org/html/draft-ietf-oauth-native-apps-09#section-7.3
IAM-2363: OpenID Connect client integrations: App-declared Custom URI Scheme Redirection
- Applications can register customer URI schemes, such as "com.example.app", as their redirect_uris.
  Reference: https://tools.ietf.org/html/draft-ietf-oauth-native-apps-09#section-7.1
IAM-1435: OpenID Connect client integrations: Support for scope in client metadata
- Use the client metadata scope setting to restrict and white list the set of allowed scopes for a OAuth client.
  Scopes "openid", "userinfo" and the client_id of the metadata's owner cannot be disallowed, so they are always implicitly included in the scope list (if set in the client metadata in the first place).
  Reference: https://tools.ietf.org/html/rfc7591#section-2
IAM-1847: Java Runtime Environment is no longer provided in the SSO installation package
- Ubisecure SSO uses now an existing JRE installation provided in the standard JRE_HOME environment variable. This must be taken into account for all upgrades from pre-8.2 SSO's.
IAM-2353: SSO writes information of the system environment in the diag log during start up
- When starting up, SSO writes a comprehensive information printout in the diagnostics log about the system environment it's running on. The printout includes JRE version, environment variables, Java security providers, trusted certificates etc. This is crucial for our support, as with the JRE now removed, it would otherwise be difficult and time consuming to gain knowledge of the exact details of the environment SSO is running on.
IAM-2873: OpenID Connect: Access token lifetime follows SSO session's lifetime
- Access token lifetime follows the lifetime of the associated SSO session, in which the token was issued. This means that an access token's lifetime can be extended by extending SSO session's lifetime. Conversely, if an SSO session is terminated, all access tokens issued during that session are revoked.
IAM-2982: OpenID Connect: Second use of authorization code revokes the access token that was previously issued for the authorization code
- When authorization code replay is detected, the access token, that has been issued for the replayed authorization code during its first use, is revoked.
IAM-2891: Error page without authentication methods is now shown also for SAML and Tupas agents
- The plain error page, that is shown when there are no visible authentication methods to be shown, was previously skipped when the application agent was of type SAML or Tupas whereas for other agent types it was visible. This behaviour is now unified so that the error page is visible with all agents.
  Any other page (such as authentication method list also known as "menu" page) that happened to contain an error message was shown with all agents even in previous versions.
IDS-22: Improved support for UI template setting in Password Change and Password Reset
- There are some UI template settings, that hasn't been shown properly in the Password application. These setttings are logo.ico, logolink, logoalt, HEADER_TEXT_1, HEADER_TEXT_2 and COPYRIGHT. Now they are shown and updated correctly based on the selected UI template also in the Password Application.
  Secondly, if user changes the locale in the Password Application, the changed locale is now included in the URL that is sent in the password reset mail. Also, if the password reset was initiated from SSO login page, the changed locale is propagated back to the SSO page when user is returned there after finishing or canceling the reset.

Ubisecure SSO 8.1.2 (15/05/2017)

Corrections

IAM-2376: The rules specified in methodmenu.rules are now applied correctly

Ubisecure SSO 8.1.1 (26/04/2017)

New Features

IAM-2320: Tupas IDP: If A01Y_RETLINK contains query part, the query part is now included also in the tupas response.

Corrections

IAM-2300: In fresh SSO installation, user can now define "allowed to" -group for SSO API agent
IAM-2308: Agent type of SSO API agent is now correctly OAuth agent
IAM-2326: WS-Federation: Continue button is now shown after successful IDP initated logout, if there's active WS-Federation session
IAM-2311: Url is corrected for Nordea TUPAS test method (tupas.nordea.1) in methods-tupas.ldif

Ubisecure SSO 8.1.0 (28/03/2017)

New Features

IAM-1374: SSO support for wreply and wfresh paraneters in WS-Federation
IAM-2019: SSO support for wauth and whr parameters in WS-Federation
IAM-1352: SSO Management API - New functionality to add/remove/modify users
IAM-1457: SSO Management API - New functionality to create mapping configuration (persistentId, refreshtokenPolicy)
IAM-1735: Sms-mt-otp and smtp-otp grant, added error description to Error Response explaining the error situation
IAM-1907: OTP Timout for Sms-mt-otp and smtp-otp grant,is now configurable in minutes. By default, there is no timeout.
IAM-2073: TUPAS IDP A01Y_RETLINK parameter allows ignoring of query parameters from the URL(s)
IAM-2110: Type and attribute names in SSO Management API calls for input are now case in-sensitive. Type and attribute names in responses are now in CamelCase.
IAM-2204: Java updated to version jdk-8u121
IAM-2197: Tomcat updated to version 8.0.42

Corrections

IAM-2066: SSO Linux UbiloginDirectory does not fail to start after reboot (because the OS changes /var/run/ubilogin ownership to root:root)
IAM-2075: Agents with empty template field, no longer show the wrong template in login page
IAM-2018: Agent activation file download now works also in new Chrome browser

Ubisecure SSO 8.0.1 (02/12/2016)

Corrections

IAM-1833: MPKI authentication now works with mobileconnectloginhint-compabilityflag and ENCR_MSIDN

Ubisecure SSO 8.0.0 (25/11/2016)

New Features

IAM-1320: SSO Server acts as a TUPAS IDP
IAM-1478: PCR generation - an option to use new kind of UUID format as specified in RFC 4122[9]
IAM-1493: It is now possible to prevent SSO on server side by using agent setting (using either Forceauthn, oneTimeUse or both parameters)
IAM-1736: New Ubisecure look and feel to SSO
IAM-1770: New tomcat version 8.0.38

Corrections

IAM-1685: SAML agent metadata configuration fixed - agentlogo is not mandatory when clientname is used

Ubisecure SSO 7.x.x

Ubisecure SSO 7.7.1 (03/10/2016)

New Features

IAM-1506: SSO authorization policy can decrypt values

Corrections

IAM-1538: SSO password app doesn't show errors for all users

Ubisecure SSO 7.7.0 (26/08/2016)

New Features

IAM-1032: OpenID Provider Metadata, tokeninfo_endpoint replaced with introspection_endpoint (RFC 7662)
IAM-1384: Token Introspection updates for RFC 7662
IAM-1066: MPKI login screen can be configured so that it does not ask a spam code and tries automatically to login if mobile connect crypted loginhint is provided.
IAM-1451: OAuth2 and SAML2 metadata agent logo, based on locale, can be set visible in the login screen, with or without the default SSO logo
IAM-1474: SSO openldap version upgrade to openldap-2.4.44 (OpenLDAP is now compiled without DDS overlay and with both BDB (default) and new MDB backends)

Corrections

IAM-1420: SSO management GUI copyright message is changed to state GlobalSign instead of Ubisecure

Ubisecure SSO 7.6.0 (29/05/2016)

New Features

IAM-712: OAuth 2.0 Token Revocation (RFC 7009).
IAM-1124: SAML Profile for OAuth 2.0 Authorization Grants (RFC 7522)
IAM-1354: SSO Management API new functionality to allow Relying Party specified client_id and secret for OAuth2 metadata (RFC-7591 Dynamic client registration protocol)
IAM-1364: OAuth2 and SAML2 metadata client name can be set visible in the login screen, id addition, or to replace to current hostname
IAM-1365: SSO Login screen templates can contain also javascript resources
IAM-1366: Username in login screen cannot be changed if mobile connect login_hint is encrypted (ENCR_MSISDN)
IAM-1384: Oauth2 Token Introspection token_type supports refresh_token
IAM-1448: OAuth2 OpenID Provider Metadata changes, tokeninfo_endpoint is replaced with introspection_endpoint. Note that tokeninfo_endpoint and /uas/oauth2/tokeninfo are deprecated (will be removed in the version after 7.6)
IAM-1395: SSO can return grant type and refresh token create time to application using authorization policy
IAM-1428: AuthnStatementSessionNotOnOrAfter interop flag to leave SessionNotOnOrAfter unassigned in SAML2 response
IAM-1403: OpenID Connect idtoken contains azp attribute in Mobile Connect
IAM-1404: OAuth2 idtoken attribute aud is now always array to fully support Mobile Connect
IAM-1406: OAuth2 authorization endpoint error page now sets http status 400 to indicate error condition (Does not return user to relying party)

Corrections

IAM-1402: OpenID Connect idtoken nonce updates correctly to new auth. requests (From same client using authorization code grant)
IAM-1455: Password application url parameter "method" now handles the NUL character (= %00 url encoded) for password/reset application without error situation

Ubisecure SSO 7.5.0 (26.02.2016)

New Features

IAM-5: OAuth2-extension for confirming Email and Phone number
IAM-823: SSO Management REST API Phase 1
IAM-873: Compability flag SendAssertionConsumerServiceURL for sending AssertionConsumerServiceURL in SAML-AuthnRequest
IAM-1170: New compabilityflag ExplicitUnspecifiedAuthnContextClassRef for sending authnContextClassRef in SAML-response
IAM-941: OTP server support for external SQL user database
IAM-1060: Unregistered SMS OTP Authentication method
IAM-1208: Unregistered SMTP OTP Authentication method
IAM-1147: Login_hint now works also with unregistered authentication methods (unregistered MPKI, SMS and SMTP)
IAM-1253: SSO Management UI to GlobalSign branding
IAM-1296: OAuth request scope now ignored as long as the correct scope in use is returned in Token Endpoint response
IAM-1297: Only password, authorization_code and refresh_token are allowed OAuth grant_types By default.
IAM-1295: Template property useloginhint for showing OAuth2 login_hint in SSO
IAM-1294: Support for Mobile Connect encrypted login_hint with prefix ENCR_MSISDN

Corrections

IAM-183: Audit contains information after user tries with incorrect username

Ubisecure SSO 7.4.0 (27.11.2015)

New Features

IAM-805: Upgrade SSO JVM to Java 8
IAM-884: SSO Tomcat updated, version 8.0.27
IAM-910: OpenID Connect/Mobile Connect Identity Provider
IAM-966: Support multivalue SAML2 AuthnContextClassRef in methods
IAM-995: updated OpenSSL version to 1.0.1p, used by OpenLDAP in linux installations

Ubisecure SSO 7.3.4 (30.9.2015)

Corrections

IAM-997: Some button texts not visible in management UI
IAM-998: Service cant be deleted if name contains "<>"

Ubisecure SSO 7.3.3 (29.9.2015)

New features

IAM-817: SSO login flow should double check UDF linking need after registration and not ask for user consent if linking has be done
IAM-895: Autocomplete for password input forms settable in UI-template (affects screens in SSO and password application)
IAM-946: If address tracking (netmask) is disabled then a AuthnStatement/SubjectLocality element is no longer created in SAML Assertion
IAM-948: If directory user mapping is successful for a user then UDF process will be skipped
IAM-951: Backchannel messages (SOAP Logout) are now secured with TLS 1.2

Corrections

IAM-25: SSO Management: Form inputs should be sanitized to prevent Cross-Site Scripting
IAM-883: OAuth: Malformed JWT causes error "Unexpected char 127 (line no=1, column no=1, offset=0) at ...)"
IAM-943: Session injection in Password application doesn't work in a reverse proxy deployment
IAM-969: Methodmenu rules don't change when a template is changed

Ubisecure SSO 7.3 (29.5.2015)

New Features

IAM-9: After a successfull password reset, a SSO session is created for the user and the user is redirected to a predefined url
IAM-49: SSO Management UI for oAuth2.0 authorization server
IAM-44: OAuth 2.0 Authorization Server
IAM-73: Password application to use the SSO UI templates
IAM-601: Keytool to support SHA256WithRSA in certificate signatures

Corrections

IAM-743: Password reset token email link broken

Ubisecure SSO 7.2.1 (16.4.2015)

Corrections

IAM-270: Redirect URL for OAuth2 Authentication Method shown in SSO Management UI is invalid
IAM-266: "Logout failed" is shown when using iframelogout and more than one sp-session is active

Ubisecure SSO 7.2.0 (2.4.2015)

New Features

IAM-19: Support for OAuth2 protocol in Authentication Methods
IAM-18: Support for Facebook authentication using OAuth2
IAM-15: Support for Google+ authentication using OAuth2
IAM-14: Support for Vkontakte authentication using OAuth2
IAM-24: New password encryption methods: SHA256,SSHA256,SHA384,SSHA384,SHA512,SSHA512,PKCS5S2,PBKDF2

Improvements

IAM-27: Value of NameID/@Format can now be explicitly set or asserted in Method
IAM-36: Support for RHEL/CentOS 7
IAM-7: Support for user setting the new password when using Password-reset

Ubisecure SSO 7.1.0 (31.12.2014)

New Features

SSO-574: User Driven Federation
SSO-583: Support for Salesforce integration
SSO-590: Support for setting emailAddress as NameID Format in Authorization Policy

Improvements

SSO-472: Robots.txt search engine hiding
SSO-556: NameIDPolicy format emailaddress not supported in authrequest
SSO-565: Termplate API
SSO-596: Improved NameIDPolicy processing

Corrections

SSO-71: Columns messed up
SSO-231: Exception stacktrace thrown to user's face when trying to log in after the login window has been open for a long time
SSO-437: Web Agent activation fails on Chrome
SSO-597: OpenID Yadis handling fails with no logging

Ubisecure SSO 7.0.0 (10.3.2014)

New Features

SSO-482: Feature to embed encryption key with encrypted message
SSO-536: Health check support
SSO-535: Web Agent can change the used template when doing AuthnRequest
SSO-539: Support for template switching in SSO's 'resume' interface
See: Login UI Customization, Chapter 6. Returning to SSO login page from external applications

Improvements

SSO-531: Support for Zendesk (missing ProtocolBinding caused ticket validation error)
SSO-541: Unsolicited SAML message can be initiated from SSO UI
See: Login UI Customization, Chapter 7. Generating Unsolicited SAML Response from SSO UI
SSO-542: New parameters for SessionRelayService: isPassive, forceAuthn and oneTimeUse
See:Login UI Customization, Chapter 7. Generating Unsolicited SAML Response from SSO UI
SSO-545: Ubisecure favicon
SSO-565: Template API
See: SSO Management document, Chapter 10. Template API
SSO-566: Discovery API
See: SSO Management document, Chapter 9. Discovery API

Corrections

SSO-496: Misleading "user is not authenticated" error message logged
SSO-518: Stack trace on third-party IDP logout after access denied
SSO-519: Exception is thrown when SSO receives AuthnRequest whose AssertionConsumerServiceURL is set to be something else than Location of the first AssersionConsumerService in SP Metadata
SSO-530: Required attribute condition is not checked when no attributes are formed in an Authorization Policy
SSO-533: SSO admin userface removes name format and friendly name specifications by itself
SSO-534: Pressing Exit on the consent screen returns exception
SSO-559: SMS OTP authentication method breaks in AD when method user amount exceeds 1500
SSO-561: OTP login prompts for "Password sequence number: 1" when there are none left
SSO-564: External Discovery always interrupts with error message EXTERNAL_DISCOVERY_INVALID_AUTHENTICATION_METHOD

Ubisecure SSO 6.x.x

Ubisecure SSO 6.8.0.34260 (4 October 2013)

Improvements

SSO-118: Java EL expressions may be used in auhtorization policy rules and expressions
SSO-112: NameID content in Assertions can be controlled in authorization policies
SSO-511: Attribute-values can be concatenated in authorization policies
SSO-515: Upgrade to Java 7 64bit
SSO-516: Upgrade to OpenLDAP 2.4.35 64-bit
SSO-517: Upgrade to Apache Tomcat 7.0.42
SSO-520: Timelife of WS-Federation tokens can be changed

Corrections

SSO-395: JSVC requires /usr/lib/libcap.so which may not exist

Ubisecure SSO 6.7.1.33229 (20 June 2013)

New Features

SSO-501: ETSIMSS: Possibility to disable Schema validation

Improvements

SSO-493: OTP Server with Ubilogin Directory user support
SSO-506: macro.jar support for cmd.exe special characters

Corrections

SSO-494: Text of close button in OTP List Print dialog cannot be localized
SSO-498: Server does unwanted http queries to www.w3.org
SSO-504: Disabled OTP list works if otp is the only method configured

Ubisecure SSO 6.7.0.32899 (17 May 2013)

New Features

SSO-470: WS-Federation IdP support for SharePoint integrations

Improvements

SSO-492: Add support for SHA256 digest
SSO-483: Support for SAML metadata key-rollover when validating messages

Corrections

SSO-476: Metadata Updater: If the SAML Metadata feed contains unexpected elements import fails.

Ubisecure SSO 6.6.2.32839 (6 May 2013)

Improvements

SSO-340: Remove Ubilogin Managementin reset secret function
SSO-472: Robots.txt search engine hiding
SSO-477: OTP Print Screen to show printable OTP list top down
SSO-488: Use Ubilogin management to set compatibility flags

Corrections

SSO-475: Session status request refresh parameter counts timeout incorrectly

Ubisecure SSO 6.6.1.32263 (19 March 2013)

Improvements

SSO-462: More specific UI customization for unregistered MPKI users
SSO-454: Login form autocomplete works better in some browsers (Internet Explorer)
DIRECTORY-46: Change DirectoryServices to return singleton LDAP and SQL connections

Corrections

SSO-467: Javascript error during logout with IE8
SSO-465: No audit log entry when user logs out.
SSO-463: OpenID method NPE during login in SSO 6.6.0
SSO-460: Management: Agent list on Method screen overflows
SSO-459: Managed by rights for sites are not propagated through group memberships
SSO-449: "Authentication method selected" entry missing from the audit log

Ubisecure SSO 6.6.0.30674 (28 Dec 2012)

New Features

SSO-423: Cert AP configuration improvement
SSO-440: Support for custom Tomcat server.xml configuration

Improvements

SSO-59: Simplify Custom SSL certificate installation
SSO-60: Tomcat Hardening
SSO-293: During IDP initiated logout display warning if no SP sessions were terminated
SSO-361: Set default template title tag to Ubisecure SSO
SSO-450: Move keystore.pfx to custom folder
SSO-452: Tomcat 7.0.34
SSO-453: Java 1.6.37

Corrections

SSO-172: Tomcat Log Rollover
SSO-448: Two assertion received entries in audit log per one Tupas sign-in

Ubisecure SSO 6.5.0.29603 (9 Nov 2012)

New Features

SSO-425: Print new OTP list during logon

Improvements

SSO-400: Change etsimss to use etsimss-jaxb implementation
SSO-417: SSO session management
SSO-426: OTP Server with Katso SQL support
SSO-428: Use 2048 bit key length for self-signed certificate
SSO-438: Network address tracker disabled by default

Corrections

SSO-419: Extraneous trailing commas in JSON conversation variables

Ubisecure SSO 6.4.0.28078

New Features

SSO-408: Navigation to external applications from SSO UI

Improvements

SSO-381: Authentication of REST services
SSO-412: SSO UI javascript API

Corrections

SSO-411: LDAP/SSL Performance degradation in JDK 1.6.0_29/30

Ubisecure SSO 6.3.2.27688

Corrections

SSO-360: Method name (not Title) shown after PROXY_LOGIN_TEXT
SSO-402: REST User Mapping service corrected
SSO-405: install_initd failed on RedHat Linux 6.1

Ubisecure SSO 6.3.1.27499

Improvements

SSO-394: Include selected attributes in audit logging
SSO-396: On linux use lsb scripts for installing/removing service

Corrections

SSO-368: AuthPolicy editor add attribute not working with IE8/IE9
SSO-392: Mobile PKI with registered user should not ask for spam-code
SSO-393: Internet Explorer 9 compatibility improvements (Ubilogin management)
SSO-395: Linux: missing /usr/lib/libcap.so may prevent service ubilogin-server start
SSO-397: Landing Page does not support locales nor templates

Ubisecure SSO 6.3.0.27241 (30 Apr 2012)

New Features

SSO-110: Mobile PKI (Ficom Mobiilivarmenne) with Directory SPI support
SSO-351: Session status request - REST interface to check server session status
SSO-357: Ubisecure OTP List Server- REST interface for OTP list management

Improvements

SSO-274: Multi-master replication with OpenLDAP on Linux
SSO-374: OpenLDAP disk I/O performance, clustering improvements
SSO-376: Java™ SE 6 Update 31
SSO-377: Apache Tomcat Version 7.0.26
SSO-378: OpenLDAP 2.4.30

Corrections

SSO-347: Minor UI improvements in Management application
SSO-352: SessionNotOnOrAfter was not set in assertion issued by SSO
SSO-356: IDPProxy ForceAuthn=true caused isPassive=true
SSO-359: Value of font-family in template-created CSS is always unicode-encoded
SSO-360: Method name (not Title) shown after PROXY_LOGIN_TEXT
SSO-366: Session object housekeeping improvements during logout
SSO-368: AuthPolicy editor add attribute not working with IE8/IE9
SSO-372: Locale attribute transfer fixed in IDP Proxy cases
SSO-385: SSO Server assertExists error corrected

Ubisecure SSO 6.2.0.23692 (28 Oct 2011)

New Features

SSO-292: OpenID Relying Party method with SAML IDP Proxy support
SSO-332: Support for Common Domain Cookie discovery (CDC)

Improvements

SSO-77: Password application improvements to detect password method automatically
SSO-79: Configurable return link on successful/failed password change
SSO-334: Password reset app can be used with more than one authentication method
SSO-147: LDAP paging performance improvements
SSO-215: Group Dynamic Member configuration directory selection drop down
SSO-297: Management tool UI improvements for directory management
SSO-275: OpenLDAP recompiled with SSL/TLS support for Linux
SSO-314: Tomcat version upgraded to 7.0.20

Corrections

SSO-235: OTP list cant be printed
SSO-306: Services do not start automatically, even though Startup Type is Automatic
SSO-318: Space character in method name caused error
SSO-331: IDP-proxy and up-link IDP initiated front-channel logout corrected
SSO-335: Custom template's color definitions now used on error page

Ubilogin SSO Server 6.1.1.21804 (1 Aug 2011)

New Features

SSO-299: Support for External Discovery (aka WAYF)
SSO-269: Support for Tupas v2.3
SSO-183: Support for requiring user consent before permitting access

Improvements

SSO-300: Java Web Agent does SP initiated logout by default

Corrections

SSO-301: User defined css is not used on error page
SSO-287: Directory SPI does not decrypt ldap connection credentials
SSO-289 & SSO-290: Linux install issues

Ubilogin SSO Server 6.1.0.21057 (10 May 2011)

New Features

SSO-185: Ability to add and remove Directory SPI repositories and authentication methods from management UI
SSO-229: Add user interface to obtain user consent, before assertion is sent to application.
SSO-217: Support for CDC discovery

Improvements

SSO-176: Add feature to metadata-update tool to check revocation of installed IDP metadata
SSO-213: Upgrade Tomcat to version 7
SSO-216: Allow specifying SP specific Compatibility settings
SSO-221: In SSO server discovery menu, display image links for methods
SSO-222: Implement feature to present discovery menu methods in logical UI groups
SSO-223: Create more rules for method visibility in discovery menu
SSO-225, SSO-226, SSO-198, SSO-203 & SSO-224: Various cosmetic improvements in Management UI

Corrections

SSO-211: Tomcat Installation script doesn't set write access to application server temp-directory for Local Service-account
SSO-228: OTP authentication method help text shows "NIL" text for undefined lists as a list identifier.
SSO-244: StepUp Login UI doesn't always show correct authentication methods, when there are many methods to select from
SSO-262: Logout doesn't remove the SSO cookie
SSO-263: SSO Server produces ticket or saml response after logout when navigating back in history with back button

Ubilogin SSO Server 6.0.1.19314 (12 January 2011)

Improvements

SSO-193: Search application default wider view
SSO-99: Resizeable LogViewer screen
SSO-94: Logviewer more tolerant on bad end of line characters
SSO-97: Improved UI button texts to add context to actions
SSO-130: Simultaneous IPv6 and IPv4 support in SAML and Ticket protocol configuration
SSO-69: Version information now shown on /uas/info page
SSO-186: /uas/trace is enabled by default. Disable for production servers.
SSO-190: Template-specific UI texts

Corrections

SSO-84: Accessing disabled context menus causes server error
SSO-164: Incorrect ubiloginAuthMethodType used in uas.ldif and methods.ldif
SSO-169: Activating OTP list before enabling causes exception
SSO-189: SSO Server fails with NPE after upgrade from 5.0.7
SSO-191: InstantiationException from /uas/error
SSO-192: Exit causes stack trace on timed out session
SSO-196: "Update" button only partly visible on the home screen of management UI with IE7
SSO-197: Form double submit happens in success screen if user succeeds in pressing Continue button before autosubmit

Ubilogin SSO Server 6.0.0.18955 (23 December 2010)

New Features

SSO-117: SSO Server end-user UI redesigned
SSO-50: javascript loggedin/loggedout function using status.js, success.png and pixel.gif
SSO-158: Support for multiple SAML signing certificates
SSO-161: Hashed TUPAS support
SSO-27: Localized graphic resources
SSO-31: Alternative order in login sequence: username + password, then method selection
SSO-33: Save logout returnurl upon login
SSO-65: Select authentication method in UAS and/or UWA
SSO-128: Decide authentication method and user repository based on user name

Improvements

SSO-92: HTML page validation
SSO-146: Store session objects in ldap as dynamicObject types
SSO-165: Attribute FriendlyName and Name Format support in updated Authorization Policy editor
SSO-170: Mark session and other cookies HttpOnly
SSO-187: Resizable Ubilogin Management UI
SSO-12: Template and locale remembered during logout

Corrections

SSO-13: Fatal error after Ticket validation error / attachTicketRequest
SSO-17: IdP Proxy with multiple agents causes loop on logout
SSO-19: Fix the functionality of UAS cancel and back buttons when only one method is configured
SSO-58: Disable ADAMDisablePasswordPolicies during win32 install
SSO-122: Default ADAM tombstone settings
SSO-163: SPI Password does not display passwordLastSet
SSO-181: Attribute name format setting for SAML messages

Browser not supported